Saturday, August 18, 2012

Flag Quilt & How-to Part 2

This is Part 2. Part 1 is here.

I made a complicated blue field of stars for this flag out of tediously small half-square triangles. It took for-freakin-ever. I will NEVER do that again. I'm going to show you how it was done but there are definitely other, less mind-numbing, ways to do it.

Cut a bazillion 2"x2" squares in dark blues, light blues, and whites. Seriously. A Bazillion. If you're not familiar with rotary cutting quick strips for your squares, see the video in Part 1.

Each star is made of four small quilt blocks. Each small quilt block is made of four half-square-triangles (HST's). Part 1 also explains how to whip those HST's out really fast.

For each small quilt block you need 1 hst that is dark blue on light blue, 1 hst that is dark blue on dark blue, 1 hst that is are light blue on white, and 1 hst that is white on dark blue. They go together like this...

The finished star block is 4 3/4" inches. Thank you, Wenchy W, for asking (she is going to make the flag quilt but with a different star pattern. A good idea because these were a tedious pain in the butt).

It takes 28 stars. Sew 6 stars together in a row. Then sew another row of 5 stars. Notice the short row has some dark blue hst's (2x4) at the beginning and the end so it will be offset next to the long row. 

When the blue field is done, sew it to one end of the short stripes (explained in Part 1). Then sew that to the long stripes.

The quilt top is complete. Make a sandwich with a back fabric, quilt batting, and the quilt top. Pin it all over; I use curved safety pins made for quilting. They are time-savers and frustration-savers.

Now just sew it all together in whatever pattern you like. I use my Granny's old Singer sewing machine so I keep it simple with straight lines. These go diagonally up the quilt.

I didn't want a border around my flag quilt at all so I turned the edges in and top-stitched it. Check the back to make sure you caught the fabric all the way down the edge.

If I were going to make another one, I might do the blue field exactly like the stripes (only in all dark blues, of course). It would take 7 rows of 9 blocks. Then I'd probably applique several medium size stars using various fabrics in shades of whites and light tans.

Here is a less complicated pieced star that would be a great option. It's a customer quilt (Debi P.) on, a quilting service.

A Google search brings up a lot of great American flag quilts; many ways to go. I like mine best though : )

2016 update. Still putting the flag quilt out on holidays.
I might add a border one of these days; it seems like it needs one.

Flag Quilt & How to make all those little blocks fast

Every 4th of July and Memorial Day I would think Man, I wish my flag quilt was finished so I could hang in on the front porch rail. So I finally got my hiney in gear and finished it this July. In fact, on the 4th of July everything was done except hemming the edges.

It is made of a BUNCH of half-square-triangle (HST) blocks and I'm going to show you how to make a stack of them quick as a wink. We'll also look at how the flag was put together.

I used a rotary cutter and cutting mat to cut long strips of fabric four inches wide. Just fold the fabric a few times so it will fit on your mat, slice the end off with the rotary cutter so you have a nice, neat edge, then cut four inches off the end. If you're having trouble visualizing that, here is a video by youtuber mdhaworth that demonstrates it very well.

My cutting mat is smaller so I have to fold my fabric an extra time or two. Remember you need 4-inch wide strips for the flag quilt. Unfold your strips and stack about four layers of fabric strips very neatly, one on top of the other, making sure all the edges match up, then cut 4-inch squares using the same method as the strips.

For this flag quilt, I used several different shades and patterns of red fabrics, blue fabrics, and whites and tans.

Take two different red squares and stack them with right sides together. Now we're ready to sew. I have a really old singer with a simple needle and presser foot. It is 1/4 inch from the edge of the presser foot to the needle and that's just what we need. Newer machines can adjust the needle position left, center, or right; put your needle so that you have 1/4 inch from the left side of the presser foot to the needle.

Line the left edge of your presser foot with the corner of your squares. You want your seam to land 1/4 inch from the center line. Lots of quilters measure and mark lines. I just eye-ball it and aim for the opposite corner.

When you get to the opposite corner don't bother back-stitching and definitely don't pull and cut your thread. Just keep going right on to the next pair of squares.

Keep doing this until you have about 10 of these connected like a kite tail. A Lamborghini poster is essential to the success of your quilt. Trust me.

Pull a little slack in your thread. You can cut it or not. I don't. Pivot your kite tail around and sew a line down the other side of the squares.

Once you've sewn the other seam down your squares, you're ready to cut the threads between the squares, cut down the center between your seam lines, and finger-press your squares open.

Now you have 20 half-square-triangle blocks. You need a butt-load more. When I was working on mine, I would sew blocks until I had enough to sew together to make a flag stripe.

The long stripes at the bottom of the flag took 20 blocks.

The short stripes at the top of the flag took 11 blocks.

All in all you need 140 red blocks and 120 white blocks. Wow. That's a lot. Don't think about it. Just turn on your radio and sew.

Don't Do The Stupid Thing I Did... most of my stripes were sewn together with the upper triangle pointing left. Two of my red stripes were sewn together with the upper triangle pointing right.

I didn't notice this until I was sewing my stripes together and I couldn't just flip the stripe around and make it right; it was still the same. The only way to fix it would have been to rip all those little seams where the blocks were sewn together and redo them. Oh no. Hell no.

It's not noticeable now that the quilt is all together but it really bummed me at the time. Not bummed enough to redo it but, you know, a mini-bum.

Moving on. Sew all the long stripes together, then sew all the short stripes together. But don't put the long ones with the short ones yet, you need the blue field of stars first.

Continued in next post!

Saturday, August 11, 2012

THAT is a gorgeous hunk o wood

We did some room trading and needed to make the small pink & zebra room into a more masculine space for when College Man is home. We started with this inspiration room but veered from it almost completely. We have a book shelf and a stump!

His favorite things about the room were the skylight, bookshelf, and stump. I LOVED the wood covered wall but instead of going to the expense or taking the time to hunt down reclaimed lumber, I made the most of one rough-cut cedar plank. It was at my sister-in-law's new house, left behind by the previous owners, and she gave it to me when we were moving them in.

I had started sanding one end before I took the photo. It was rough and dark. We couldn't see the grain at all and didn't know that it was cedar until we cut it to size - there is no mistaking the wonderful smell of fresh-cut cedar!

I went over it twice with two sheets of 100 grit sandpaper and twice more with 2 sheets of a little bit finer 150 grit sandpaper.

I put 3 thin coats of clear gloss polyurethane on it. 3 thin coats will bring that grain out and gloss it up way better than 1 or two thick coats. The first two coats got a little sanding with a 180 grit foam sanding block after they were dry, then wiped down with a damp cloth. It was tempting to stop at 2 coats but that third coat turned out really rich and deep.

Minwax plyurethane for the cedar plank and Minwax plolyshades in Pecan for the white pine that I attached for books to sit on. The pecan seemed like it would blend pretty well with the shade of the polished cedar but it turned out too orange. A medium oak shade probably would have looked better. For stains and  glosses, I usually use a cheap throw-away brush. I figure they have less environmental impact than the solvent it would take to clean out expensive brushes. Wrap em in a little plastic wrap to save them between coats.

Here it is on the wall. I located the center of four studs and screwed in 6 big galvanized screws. Dabbed a little antique copper craft paint on the screw heads to hide them. The book shelf is attached with metal corner braces. I wound up camouflaging them a little with the same antique copper craft paint.

This shows the top left screw head covered with the paint and the bottom left still bare.

Here we are with the shelf decked out, a good ole lumberjack plaid blanket, and an awesome stump that one of my husband's friends from work gave to us out of his wood pile. Matchstick bamboo blinds cover the windows.

I camouflaged the metal brackets a little more with tree branch pieces cut on an angle.

Everybody's got a little captain in em. And a little crown royal apparently. That one has a slit cut in the lid for coins.

Don't Do The Stupid Thing I Did... I reckon most of my posts will have one of these paragraphs. This project went pretty smooth except for the plank being a little warped and not fitting flat against the wall. Nothing much to do about that but just work with it. The sander, however, I don't know how many times I've used that thing but this weekend I noticed it has little holes on it that are supposed to suck some of the saw dust into a little receptacle on the back. That is if I hadn't been blocking the holes all this time with solid no-holes sand paper. Oh well, no biggie.